NAME : G10 Glass-Cloth Reinforced Epoxy BOLTS/FR4 BOLTS /INSULATION BOLTS /NUTS ,INSUALTION NUTS /G10 NUTS /NUTS AND BOLTS
Characteristics:
The most versatile all-around laminate grades are continuous glass woven fabric impregnated with an epoxy resin binder. Epoxy resins are among the most versatile and widely used plastics in the electronics field, primarily because water absorption is virtually nil, rendering it an outstanding insulator
Size: please ask for us.
COLOUR :GREEN /yellow /light green
Applications:
Extremely high mechanical strength, good dielectric loss properties,
good electric strength properties, both wet and dry.
Also can used as insulating part in machinery and electrical instruments, it also can be used as pressure ,usually used in the transformer generator motor and others
Size : according to customer design
Longth :500mm or 1000mm also can cut according to customer requirements
Epoxy laminated glass-fiber specification
| Heat Resistance | B | Standard | Q/DJ10-731-2000 |
| Density | ≥1.65g/cm3 | ||
| Hydroscopicity | < 0.60 MPA | ||
|
Volume Resistively |
Under normal | ≥1.0×1010 Ω.cm | |
| After immersion 24h | ≥1.0×108Ω.cm | ||
|
Insulation Resistance |
Under normal | ≥1.0×1010Ω | |
| After immersion 24h | ≥1.0×107Ω | ||
|
Proof Voltage at perpendicular to lamination (transformer oil at 90± degree for 5 min) |
MV/m |
≥8 |
|
| Heat stability (150 degree ,/24 H ) | No crack or plump up | ||
