NAME : G10 Glass- fiber Reinforced Epoxy square nuts BOLTS/FR4 BOLTS /INSULATION nuts /fastener
Characteristics:
The most versatile all-around laminate grades are continuous glass woven fabric impregnated with an epoxy resin binder. Epoxy resins are among the most versatile and widely used plastics in the electronics field, primarily because water absorption is virtually nil, rendering it an outstanding insulator
Size: please ask for us.
COLOUR :GREEN /yellow /light green
Applications:
A square nut is a four sided nut. Compared to standard hex nuts, square nuts have a greater surface in contact with the part being fastened, and therefore provide greater resistance to loosening as well as greater resistance to tightening. Fiberglass reinforced plastics are very strong and corrosion resistant.
Also can used as insulating part in machinery and electrical instruments, it also can be used as pressure ,usually used in the transformer generator motor and others
Size : according to customer design
Epoxy laminated glass-fiber specification
| Heat Resistance | B | Standard | Q/DJ10-731-2000 |
| Density | ≥1.65g/cm3 | ||
| Hydroscopicity | < 0.60 MPA | ||
|
Volume Resistively |
Under normal | ≥1.0×1010 Ω.cm | |
| After immersion 24h | ≥1.0×108Ω.cm | ||
|
Insulation Resistance |
Under normal | ≥1.0×1010Ω | |
| After immersion 24h | ≥1.0×107Ω | ||
|
Proof Voltage at perpendicular to lamination (transformer oil at 90± degree for 5 min) |
MV/m |
≥8 |
|
| Heat stability (150 degree ,/24 H ) | No crack or plump up | ||
