Product Application
Insulation Fiberglass Filament Winding TaperTubes /Corn Tube Widely used in oil-immersed transformer, H class dry type transformer, railway locomotive transformer on-load tap-changer, reactor, lightning arrester, SF6 transformers, such as high pressure test device main insulation products.
Epoxy fiberglass winding tube is made of fiberglass yarn impregnated with epoxy resin etc, and then rolled in wet method, and then dried and consolidated. Its heat resistance level can be up to H level, and it also has excellent electrical and mechanical properties, low dielectrical loss, no deformation, chemical resistant etc. It can be used as main insulator on H grade dry type transformers, load tap changer, reactor, lightning protector, SF6 Inductor etc.
The main use is for arresters (sleeves), flow limited fuse boxes, link sticks, earth sticks and some high voltage electric equipment.applications requiring good insulation resistance, arc resistance, and dielectric strength. Recommended for its dimensional stability under varying humidity condition. sush as high voltage insulators and fuses tubes,CMOA , spacers, and coil forms for electrical equipment,Antennas.Battery ,casings ,Bearings and Collars,Bushings,Cryogenics,Equipment and Tool Handles.Impeder tubes.Pressure tubing,Structural tubing,Water and wastewater treatment components etc.
Epoxy glass fiber reinforced entwined tube
1) Excellent mechanical strength,
2) High mechanical load
3) High voltage resistance and low dielectric loss.
4) Light weight
5) Adjust the winding angle to satisfied with your any mechanical strength demand
6) Thickness is from 1mm to more 7) Work temperature: B (125C)/ F(155C)/ H(180C)/ 220-250 C
7) Corrosion resistance, Resistance to chemical corrosion (SF6) .
8) High temperature resistance
9) No deformation, no layer.
10) Water absorption minimum.
11) Fire Resistance: UL94 V-0.
12) Good flatness, smooth surface, no pits, standard thickness tolerances.
13) Low water absorption, has good moisture resistance and good dielectric properties .
14) Stable electrical insulating properties, good electrical performance in dry or wet conditions.
15) High mechanical strength, good processability Punching, Drilling, Machining and Cutting is available.
16) Good mechanical workability.
17) In high temperature electric performance is stable.
18 ) High mechanical properties and dielectric properties.
19) Corrosion resistant, light
Note: 1.Color: all kinds of colour
2.Length: according to Customer requirement.
G10 Filament Winding Fiberglass Reinforced Epoxy Tube/ Insulation Fiberglass Filament Winding TaperTubes /Corn Tube
SPECIFICATIONS FOR Filament WINDING Fiberglass Glass Reinforced Epoxy TUBE
| Category | Characteristics | Unit | Value |
| Mechanical Properties | Tensile strength(ring) | MPa | ≥900 |
| Tensile strength(axial) | MPa | ≥55 | |
| Compressive strength(longitudinal) | Mpa | ≥150 | |
| Perpendicular to the bending | MPa | ≥120 | |
| Vertical bending modulus of elasticity | MPa | ≥1.6X104 | |
| Shear strength | MPa | ≥700 | |
| Electrical Properties | Axial impact withstand voltage | – | 7KW/mm, 5 times |
| Radial frequency withstand voltage | – | 8KW/mm, 1 min | |
| Medium wearing factor(50Hz) | – | 7.65X10-3 | |
| Relative dielectric constant(50Hz) | – | 5.59 | |
| Partial discharge(35KW) | pC | ≤5 | |
| Water diffusion test | – | 12KW, 1min | |
| Sheet resistivity | Ω | ≥9.5X1014 | |
| Volume resistivity | Ω.m | ≥6.0X1012 |
| Technical parameter: | ||||
| Item | Uint | Value | ||
| Density | g/m³ | ≥2.0 | ||
| Compression Strength | Mpa | ≥200 | ||
| Bending Strength | Mpa | ≥320 | ||
| Volume resistivity | Noemal when | Ωm | 1.0 x 1011 | |
| After soaking | 1.0 x 109 | |||
| Parallel layer to the insulation resistance | Noemal when | Ω | 1.0 x 1011 | |
| After soaking | 1.0 x 109 | |||
| Surface breakdown voltage after wettingin normal air for 1 min with gap between electrodes of 30mm | KV | ≥15 | ||
| Vertical layer to the breakdown voltage ( in transformer oil of 90±2ºC)δ≤3mm δ> 3mm | MV/m | ≥18 | ||
| Parellel layer to the breakdown voltage ( in transformer oil of 90±2ºC) | KV | ≥50 | ||
| Dielectric loss factor 50 Hz | Min | ≤0.02 | ||
| Water absorbtion rate | % | less than 0.02 | ||
| Item | Thermal Grade | ºC | Characteristic |
| 3641 | Grade B | 130ºC | Mechanical and electrical applications, good heat resistance. |
| G-10 | Grade B | 130ºC | Mechanical and electrical applications, good heat resistance. |
| G-11 | Grade F | 155ºC | Mechanical and electrical applications, good heat resistance. |
| FR-4 | Grade B-F | 130-155ºC | Flame resistance, mechanical and electrical applications. |
Customer Service
We understand purchasing is the most complicated and cumbersome work. Various trade platform can not display all contents of purchasing. Only a responsible supplier who always standby can undertake this task. Large scale operation can maintain our cost advantage and maintain quality. Low labor cost and large nu mber of factories in China provide rich resources for us. We are responsible for purchasing and production, so that our customers can put together advantages to develop market. We look forwarder to establish lon g term cooperation with our client, and we provide more services to make it eaiser.
– Free technical assistant
– Quality control on every single order based on SGS AQL 2.5-4.0
– Online order tracking
– Member pricing online checking
– Ideas share
– New products alerts
Storage:
Horizontal placement, storage at room temperature in dry and clean room and keep it from damp, storage period is 12 months.
Packaging & Delivery
Packaging Details : carton and packaged in plywood pallet, or by customer’s demand
Port: Tianjin, Qingdao or Shanghai
Lead Time : 7-15days
Please Contact Us
Miss: lydia
Mob: 86-13752439076 Fax: 86-22-60863016
Insulation Fiberglass Filament Winding TaperTubes /Corn Tube
